Metrology
Metrology
Micromar 844 AS Self-Centering Measuring Pistol
EN
  • Threaded connection for changing the measuring head
  • Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 120°
  • Anvils from 12 mm are carbide tipped
  • From 12 mm the anvils can be used to measure the bottom of a bore
  • From 40 mm all measuring heads are made from aluminium to reduce weight
  • Instruction manual
  • Setting rings
  • Key for replacing measuring heads (from 30 mm)
  • Case
  • Technical data

Order no.Measuring range mmMeasuring range inchesResolution mm/inchNotes error limit
4487750
6 - 12
.25 - .4725"
  • Over the full length of the anvils
  • Indicator is not taken into consideration
4487751
12 - 20
.4725 - .775"
  • Over the full length of the anvils
  • Indicator is not taken into consideration
4487752
20 - 50
.775 - 2"
  • Over the full length of the anvils
  • Indicator is not taken into consideration
4487753
50 - 100
2 - 4"
  • Over the full length of the anvils
  • Indicator is not taken into consideration
4487760
6 - 12
.25 - .4725"
0.0005 / .00002"
  • Over the full length of the anvils
  • Indicator is not taken into consideration
4487761
12 - 20
.4725 - .775"
0.0005 / .00002"
  • Over the full length of the anvils
  • Indicator is not taken into consideration
4487762
20 - 50
.775 - 2"
0.0005 / .00002"
  • Over the full length of the anvils
  • Indicator is not taken into consideration
4487763
50 - 100
2 - 4"
0.0005 / .00002"
  • Over the full length of the anvils
  • Indicator is not taken into consideration