Metrology
Metrology
MaraMeter 300P-7 Indicating Snap Gage
EN
Product features
  • Patented “Channel Lock” design assures precisely parallel anvil surfaces throughout the full 25 mm / 1“ range of adjustment.
  • All Series 300P Snap Gages are fully adjustable with positive position locking at any point within the range.
  • 0.50 mm / .020“ Range of Sensitive Contact.
  • Snap Gages available over a wide range of sizes, styles, and readout configurations.
  • Large 15.5 mm / .61“ square tungsten carbide anvils provide flat, parallel, long lasting working surfaces ensuring precision that lasts.
  • Indicator can be rotated to read from front or rear of the gage.
  • All adjustments accomplished using a single hex wrench (furnished).
  • Technical data

Order no.Product typeDistance of movable anvil_mmProbe_path_inchSize of measuring surface in mmParallel error in µmMeasuring forceMounting hole for indicator
2050485
300P-1
0.5 mm
0.02 inch
15,5 x 15,5 mm
4 µm
18 N
0.375 inch
2050497
300P-2
0.5 mm
0.02 inch
15,5 x 15,5 mm
4 µm
18 N
0.375 inch
2050499
300P-3
0.5 mm
0.02 inch
15,5 x 15,5 mm
4 µm
18 N
0.375 inch
2050511
300P-4
0.5 mm
0.02 inch
15,5 x 15,5 mm
4 µm
18 N
0.375 inch
2050514
300P-5
0.5 mm
0.02 inch
15,5 x 15,5 mm
4 µm
18 N
0.375 inch
2050516
300P-6
0.5 mm
0.02 inch
15,5 x 15,5 mm
4 µm
18 N
0.375 inch
2050518
300P-7
0.5 mm
0.02 inch
15,5 x 15,5 mm
4 µm
18 N
0.375 inch
2050527
300P-8
0.5 mm
0.02 inch
15,5 x 15,5 mm
4 µm
18 N
0.375 inch
2050529
300P-9
0.5 mm
0.02 inch
15,5 x 15,5 mm
4 µm
18 N
0.375 inch